About the product
MASARAT can test and certify all makes and classes of Biological Safety Cabinets (BSC) to international standards on either a service contract basis or a visit by visit basis.
When testing and certifying Biological Safety Cabinets it is important to undertake a wide range of tests to ensure that the unit is operating safely. The range of tests required is set down in the regulation NSF49. Certificates issued without undertaking all the required tests are not valid.
When Masarat undertake testing, accreditation or certification of a biological safety cabinet the following tests are typically performed:
Inflow Air Velocity Test : Necessary for personal protection
Downflow Air Velocity Test: Necessary for product protection
HEPA Filter Leak Test : Necessary for protection to your working agents and room environment
Smoke Visualization Tests : These verify the proper airflow directions and patterns in the cabinet
Site Installation Test: Verifies alarm setting and calibration
Light Intensity Test: Assures sufficient light to prevent operator fatigue
Electrical Safety Test: Assures that the unit is electrically safe for worker use
Vibration Testing: Assures that the product is not damaged by vibration
If the HEPA filters in your Safety Cabinet needs replacing Masarat can source the correct filters for you (either from the overseas Manufacturer or locally constructed to international standards), and fit the new filters. NOTE before all major maintenance of Biological Safety Cabinets it is vital to undertake a full decontamination. This must be carried out by professionally trained personnel to ensure Biohazard risks are minimized. For expert professional Decontamination of your Biological Safety Cabinets before you move them or after a major incident you can rely upon Masarat's professionally trained team.
Trust MASARAT for ACCREDITATION, with our qualified Certifiers, to test and maintain your BSC to international standards.
When testing and certifying Biological Safety Cabinets it is important to undertake a wide range of tests to ensure that the unit is operating safely. The range of tests required is set down in the regulation NSF49. Certificates issued without undertaking all the required tests are not valid.
When Masarat undertake testing, accreditation or certification of a biological safety cabinet the following tests are typically performed:
Inflow Air Velocity Test : Necessary for personal protection
Downflow Air Velocity Test: Necessary for product protection
HEPA Filter Leak Test : Necessary for protection to your working agents and room environment
Smoke Visualization Tests : These verify the proper airflow directions and patterns in the cabinet
Site Installation Test: Verifies alarm setting and calibration
Light Intensity Test: Assures sufficient light to prevent operator fatigue
Electrical Safety Test: Assures that the unit is electrically safe for worker use
Vibration Testing: Assures that the product is not damaged by vibration
If the HEPA filters in your Safety Cabinet needs replacing Masarat can source the correct filters for you (either from the overseas Manufacturer or locally constructed to international standards), and fit the new filters. NOTE before all major maintenance of Biological Safety Cabinets it is vital to undertake a full decontamination. This must be carried out by professionally trained personnel to ensure Biohazard risks are minimized. For expert professional Decontamination of your Biological Safety Cabinets before you move them or after a major incident you can rely upon Masarat's professionally trained team.
Trust MASARAT for ACCREDITATION, with our qualified Certifiers, to test and maintain your BSC to international standards.
Contact with supplier
Company